System consists of:

• Double-acting servo-hydraulic actuator with force capacity up to 25 kN Dynamic Load, resistant to at least 1 G acceleration
• High-stiffness, precision-aligned load frame with 4 columns and actuator in upper crosshead.
• 150 mm (±75 mm) of usable stroke
• The test system can perform dynamic applications up to 2 Hz with a speed limit of 1000 mm/s.
• Frequency and amplitude can be adjusted within the speed limits. The system is capable of performing
• Non-stop tests up to 2,000,000 cycles.
• Designed for both dynamic and static testing on a variety of materials and components
• Machine is suitable for TS 3032 Standards for 3 types of test scenarios: Friction test of gas, Sliding test, Life test.
• Frame has a 5 test stations to test 5 samples at the same time.
• Adjustable upper crosshead with hydraulic lifts and locks fitted as standard for easy adjustment of daylight
• Advanced load cell for faster testing and reduction of inertial errors
• Low friction actuators for higher side-load resistance or material critical applications
• Compatible with a large range of grips, fixtures, chambers, video extensometers, protective shields, and other accessories
• Hydraulic control unit equipped with a servo valve controlled, water cooled heat exchanger system and connected to the Chiller unit to be supplied with the system;
• High dynamic servo valve.
• The MTS consists of a contactless electromagnetic displacement sensor with 0.001 mm resolution.
• Servo closed-loop controlled electronic control unit
• Appropriate dynamic testing software Fatigue rated load cell
• Load measurement and control is carried out with a 25 kN capacity fatigue rated load cell between 2% and 100% of the device capacity with class 1 or better sensitivity according to ISO 7500-1 standard.
• Displacement measurement and control It can be performed with an accuracy of 0.01mm with an SSI type sensor with non